Chemistry:Lithium sulfate

From HandWiki
Lithium sulfate
Lithium sulfate
Error creating thumbnail: File with dimensions greater than 12.5 MP

__ Li+ __ S6+ __ O2−
Lithium sulfate (1).JPG
Names
IUPAC name
Lithium sulfate
Other names
Lithium sulphate
Identifiers
3D model (JSmol)
ChemSpider
RTECS number
  • OJ6419000
UNII
Properties[1]
Li2SO4
Molar mass 109.94 g/mol
Appearance White crystalline solid, hygroscopic
Density 2.221 g/cm3 (anhydrous)
2.06 g/cm3 (monohydrate)
Melting point 859 °C (1,578 °F; 1,132 K)
Boiling point 1,377 °C (2,511 °F; 1,650 K)
monohydrate:
34.9 g/100 mL (25 °C)
29.2 g/100 mL (100 °C)
Solubility insoluble in absolute ethanol, acetone and pyridine
−-40.0·10−6 cm3/mol
1.465 (β-form)
Structure[2]
Primitive monoclinic
P 21/a, No. 14
a = 8.239 Å, b = 4.954 Å, c = 8.474 Å
α = 90°, β = 107.98°, γ = 90°[2]
328.9 Å3
4
Tetrahedral at sulfur
Thermochemistry
1.07 J/g K
113 J/mol K
−1436.37 kJ/mol
-1324.7 kJ/mol
Hazards
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
2
0
Lethal dose or concentration (LD, LC):
613 mg/kg (rat, oral)[3]
Related compounds
Other anions
Lithium chloride
Other cations
Sodium sulfate

Potassium sulfate
Rubidium sulfate
Caesium sulfate

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.

Properties

File:38. Реакција на литиум со сулфурна киселина.ogv

Physical properties

Lithium sulfate is soluble in water, though it does not follow the usual trend of increasing solubility of most salts with temperature. To the contrary, its solubility in water decreases with increasing temperature, as its dissolution is an exothermic process. This relatively unusual property, also called retrograde solubility, is shared with few inorganic compounds, such as calcium hydroxide (portlandite, an important mineral phase of hydrated cement paste), the calcium sulfates (gypsum, bassanite, and anhydrite) and lanthanoid sulfates whose dissolution reactions are also exothermic. The retrograde solubility is common for gases dissolution in water, but less frequently encountered for the dissolution of solids. Calcium carbonate also exhibits a retrograde solubility, but it also depends on the behavior of CO
2
dissolution in the calco-carbonate equilibria.

Lithium sulfate crystals, being piezoelectric, are also used in ultrasound-type non-destructive testing because they are very efficient sound receivers. However, they do suffer in this application because of their water solubility.

Since it has hygroscopic properties, the most common form of lithium sulfate is lithium sulfate monohydrate. Anhydrous lithium sulfate has a density of 2.22 g/cm3 but, weighing lithium sulfate anhydrous can become cumbersome as it must be done in a water lacking atmosphere.

Lithium sulfate has pyroelectric properties. When aqueous lithium sulfate is heated, the electrical conductivity also increases. The molarity of lithium sulfate also plays a role in the electrical conductivity; optimal conductivity is achieved at 2 M and then decreases.[4]

When solid lithium sulfate is dissolved in water it has an endothermic disassociation. This is different from sodium sulfate which has an exothermic disassociation. However, the exact energy of disassociation is difficult to quantify as it seems also to depend on the quantity (number of mols) of the salt added to water. Small amounts of dissolved lithium sulfate induce a much greater temperature change per mol than large amounts.[5]

Crystal properties

Lithium sulfate has two different crystal phases. In common phase II form, Lithium sulfate has a sphenoidal monoclinic crystal system that has edge lengths of a = 8.23Å b = 4.95Å c = 8.47Å β = 107.98°. When lithium sulfate is heated passed 130 °C it changes to a water free state but retains its crystal structure. It is not until 575 °C when there is a transformation from phase II to phase I. The crystal structure changes to a face centered cubic crystal system, with an edge length of 7.07Å.[6] During this phase change, the density of lithium sulfate changes from 2.22 to 2.07 g/cm3.[7]

Uses

Lithium sulfate is used to treat bipolar disorder (see lithium pharmacology).

Lithium sulfate is researched as a potential component of ion conducting glasses. Transparent conducting film is a highly investigated topic as they are used in applications such as solar panels and the potential for a new class of battery. In these applications, it is important to have a high lithium content; the more commonly known binary lithium borate (Li₂O · B₂O₃) is difficult to obtain with high lithium concentrations and difficult to keep as it is hygroscopic. With the addition of lithium sulfate into the system, an easily produced, stable, high lithium concentration glass is able to be formed. Most of the current transparent ionic conducting films are made of organic plastics, and it would be ideal if an inexpensive stable inorganic glass could be developed.[8]

Lithium sulfate has been tested as an additive for Portland cement to accelerate curing with positive results. Lithium sulfate serves to speed up the hydration reaction (see Cement) which decreases the curing time. A concern with decreased curing time is the strength of the final product, but when tested, lithium sulfate doped Portland cement had no observable decrease in strength.[9]

Lithium-ion batteries

Lithium sulphate monohydrate (Li2SO4 · H2O) containing around 10% lithium is a useful chemical for the production of lithium hydroxide for the lithium-ion battery materials supply chain. It is a less reactive material than LiOH, and hence can be more easily stored and transported.[10][11]

Feedstock of hard-rock spodumene concentrate is processed by acid roasting, followed by water leaching, achieving a lithium recovery of 84-88%. Evaporation is then applied to the purified leach solution resulting in a primary lithium sulphate solid product made up mostly of lithium sulphate monohydrate (Li2SO4 · H2O).

Medication

Lithium ion (Li+) is used in psychiatry for the treatment of mania, endogenous depression, and psychosis, and also for treatment of schizophrenia. Usually lithium carbonate (Li2CO3) is applied, but sometimes lithium citrate (Li3C6H5O7), lithium sulfate or lithium oxy-butyrate are used as alternatives.[12] Li+ is not metabolized. Because of Li+ chemical similarity to sodium (Na+) and potassium (K+) cations, it may interact or interfere with the biochemical pathways of these substances and displace these cations from intra- or extracellular compartments of the body. Li+ seems to be transported out of nerve and muscle cells by the active sodium pump, although less efficiently.

Lithium sulfate has a rapid gastrointestinal absorption rate (within a few minutes), and complete following oral administration of tablets or the liquid form.[12] It quickly diffuses into the liver and kidneys but requires 8–10 days to reach a body equilibrium. Li+ produces many metabolic and neuroendocrine changes, but no conclusive evidence favors one particular mode of action.[12] For example, Li+ interacts with neurohormones, particularly the biogenic amines, serotonin (5-hydroxy tryptamine) and norepinephrine, which provides a probable mechanism for the beneficial effects in psychiatric disorders, e.g. manias. In the central nervous system (CNS), Li+ affects nerve excitation, synaptic transmission, and neuronalmetabolism.[13] Li+ stabilizes serotoninergic neurotransmission.

Organic chemistry synthesis

Lithium sulfate is being used as a catalyst for the elimination reaction for transforming n-butyl bromide to 1-butene at close to 100% yields at a range of 320 °C to 370 °C. The yields of this reaction change dramatically if heated beyond this range as higher yields of 2-butene is formed.[14]

References

  1. Patnaik, Pradyot (2002). Handbook of Inorganic Chemicals. McGraw-Hill. ISBN 0-07-049439-8. 
  2. 2.0 2.1 Nord, A. G. (1976). "Crystal structure of β-Li2SO4". Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry 32 (3): 982–983. doi:10.1107/S0567740876004433. 
  3. Chambers, Michael. "ChemIDplus - 10377-48-7 - INHCSSUBVCNVSK-UHFFFAOYSA-L - Lithium sulfate - Similar structures search, synonyms, formulas, resource links, and other chemical information.". https://chem.nlm.nih.gov/chemidplus/rn/10377-48-7. 
  4. Angel C.; Sobron F.; Jose I. (1995). Density, viscosity, and electrical conductivity of aqueous solutions of lithium sulfate. J. Chem. Eng., 40, 987–991.
  5. Thomson T. P.; Smith D. E.; Wood R. H. (1974). Enthalpy of dilution of aqueous Na2SO4 and Li2SO4. J. Chem. Eng., 19, 386–388.
  6. Rao C. N. R.; Prakash B. Crystal Structure Transformations in Inorganic sulfates, Phosphates, Perchlorates, and Chromates. NSRDS. 1975, 56, 2-12
  7. Fordland, T.; Keogh, M. J. The structure of the High temperature Modification of lithium Sulfate. 1957, 565-567
  8. E. I. Chemists; M. A. Karakassides; G. D. Chryssikos. A Vibrational Study of Lithium Sulfate Based Fast Ionic Conducting Borate Glasses. J. Phys. Chem. 1986, 90 4528-4533
  9. Yuhai D.; Changing Z.; Xiaosheng W. Influence of lithium sulfate addition on the properties of Portland cement paste. Construction and Building 2014, 50, 457-462
  10. "Metallurgical test work confirms Manono Primary Lithium Sulphate suitable for battery production feedstock". 13 January 2021. https://static1.squarespace.com/static/5934d2ae6b8f5beeb5ba23f3/t/5ffe6ddf77c92470c3757dbf/1610509796119/2164577.pdf. 
  11. "AVZ Minerals Limited". https://avzminerals.com.au/. 
  12. 12.0 12.1 12.2 Haddad, L.M., Winchester, J.F. Clinical Management of Poisoning and Drug Overdose. 1990 2nd ed, 656-665
  13. Poisindex, Thomson Micromedex 2005
  14. Noller, H., Rosa-Brusin, M. and Andréu, P. (1967), Stereoselective Synthesis of 1-Butene with Lithium Sulfate as Elimination Catalyst. Angew. Chem. Int. Ed. Engl., 6: 170–171. doi:10.1002/anie.196701702