Chemistry:1,5-Cyclooctadiene

From HandWiki
1,5-Cyclooctadiene
Skeletal formula of 1,5-cyclooctadiene
Ball and stick model of 1,5-cyclooctadiene
Names
Preferred IUPAC name
Cycloocta-1,5-diene[1]
Identifiers
3D model (JSmol)
Abbreviations 1,5-COD
2036542

1209288 (Z,Z)

ChemSpider
EC Number
  • 203-907-1
MeSH 1,5-cyclooctadiene
RTECS number
  • GX9560000
    GX9620000 (Z,Z)
UNII
UN number 2520
Properties
C8H12
Molar mass 108.184 g·mol−1
Appearance Colorless liquid
Density 0.882 g/mL
Melting point −69 °C; −92 °F; 204 K
Boiling point 150 °C; 302 °F; 423 K
Vapor pressure 910 Pa
1.493
Thermochemistry
198.9 J K−1 mol−1
250.0 J K−1 mol−1
21–27 kJ mol−1
−4.890 – −4.884 MJ mol−1
Hazards
GHS pictograms GHS02: Flammable GHS08: Health hazard
GHS Signal word DANGER
H226, H304, H315, H317, H319, H334
P261, P280, P301+310, P305+351+338, P331, P342+311
Flash point 32 to 38 °C (90 to 100 °F; 305 to 311 K)
222 °C (432 °F; 495 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Cycloocta-1,5-diene is a cyclic hydrocarbon with the chemical formula C
8
H
12
, specifically [–(CH
2
)
2
–CH=CH–]
2
.

There are three configurational isomers with this structure, that differ by the arrangement of the four C–C single bonds adjacent to the double bonds. Each pair of single bonds can be on the same side (cis,Z) or on opposite sides (trans,E) of the double bond's plane; the three possibilities are denoted cis,cis, trans,trans, and cis,trans; or (Z,Z), (E,E), and (Z,E). (Because of overall symmetry, trans,cis is the same configuration as cis,trans.)

Generally abbreviated COD, the cis,cis isomer of this diene is a useful precursor to other organic compounds and serves as a ligand in organometallic chemistry. It is a colorless liquid with a strong odor. [2][3] 1,5-Cyclooctadiene can be prepared by dimerization of butadiene in the presence of a nickel catalyst, a coproduct being vinylcyclohexene. Approximately 10,000 tons were produced in 2005.[4][5]

Organic reactions

COD reacts with borane to give 9-borabicyclo[3.3.1]nonane,[6] commonly known as 9-BBN, a reagent in organic chemistry used in hydroborations:

Synthesis of 9-BBN dimer.png

COD adds SCl
2
(or similar reagents) to give 2,6-dichloro-9-thiabicyclo[3.3.1]nonane:[7][8]

2,6-Dichloro-9-thiabicyclo[3.3.1]nonane, synthesis and reactions

The resulting dichloride can be further modified as the diazide or dicyano derivative in a nucleophilic substitution aided by anchimeric assistance.

Metal complexes

1,5-COD binds to low-valent metals via both alkene groups. Metal-COD complexes are attractive because they are sufficiently stable to be isolated, often being more robust than related ethylene complexes. The stability of COD complexes is attributable to the chelate effect. The COD ligands are easily displaced by other ligands, such as phosphines.

Ni(COD)
2
is prepared by reduction of anhydrous nickel acetylacetonate in the presence of the ligand, using triethylaluminium [9]

13[Ni(C
5
H
7
O
2
)
2
]
3
+ 2COD + 2Al(C
2
H
5
)
3
→ Ni(COD)
2
+ 2Al(C
2
H
5
)
2
(C
5
H
7
O
2
) + C
2
H
4
+ C
2
H
6

The related Pt(COD)
2
is prepared by a more circuitous route involving the dilithium cyclooctatetraene:[10]

Li
2
C
8
H
8
+ PtCl
2
(COD) + 3C
7
H
10
→ [Pt(C
7
H
10
)
3
] + 2LiCl + C
8
H
8
+ C
8
H
12
Pt(C
7
H
10
)
3
+ 2COD → Pt(COD)
2
+ 3C
7
H
10

Extensive work has been reported on complexes of COD, much of which has been described in volumes 25, 26, and 28 of Inorganic Syntheses. The platinum complex is a precursor to a 16-electron complex of ethylene:

Pt(COD)
2
+ 3C
2
H
4
→ Pt(C
2
H
4
)
3
+ 2COD

COD complexes are useful as starting materials; one noteworthy example is the reaction:

Ni(COD)
2
+ 4CO → Ni(CO)
4
+ 2COD

The product Ni(CO)
4
is highly toxic, thus it is advantageous to generate it in the reaction vessel upon demand. Other low-valent metal complexes of COD include cyclooctadiene rhodium chloride dimer, cyclooctadiene iridium chloride dimer, and Fe(COD)(CO)
3
, and Crabtree's catalyst.

The M(COD)
2
complexes with nickel, palladium, and platinum have tetrahedral geometry, whereas [M(COD)
2
]+
complexes of rhodium and iridium are square planar.

(E,E)-COD

E,E-COD synthesis (Stöckmann et al. 2011)

The highly strained trans,trans isomer of 1,5-cyclooctadiene is a known compound. (E,E)-COD was first synthesized by George M. Whitesides and Arthur C. Cope in 1969 by photoisomerization of the cis,cis compound.[11] Another synthesis (double elimination reaction from a cyclooctane ring) was reported by Rolf Huisgen in 1987.[12] The molecular conformation of (E,E)-COD is twisted rather than chair-like. The compound has been investigated as a click chemistry mediator.[13]

References

  1. "AC1L1QCE - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 26 March 2005. Identification and Related Records. https://pubchem.ncbi.nlm.nih.gov/summary/summary.cgi?cid=8135. Retrieved 14 October 2011. 
  2. Buehler, C.; Pearson, D. (1970). Survey of Organic Syntheses. New York: Wiley-Interscience. https://archive.org/details/surveyoforganics00bueh. 
  3. Shriver, D.; Atkins, P. (1999). Inorganic Chemistry. New York: W. H. Freeman and Co.. ISBN 978-0-716-72873-3. https://archive.org/details/inorganicchemist00shri. 
  4. Schiffer, Thomas; Oenbrink, Georg. "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a08_205.pub2. 
  5. Lee, H; Campbell, M. G.; Sánchez, R. H.; Börgel, J.; Raynaud, J; Parker, S. E.; Ritter, T. (2016). "Mechanistic Insight Into High-Spin Iron(I)-Catalyzed Butadiene Dimerization". Organometallics 35 (17): 2923–2929. doi:10.1021/acs.organomet.6b00474. 
  6. Soderquist, John A.; Negron, Alvin (1998). "9-Borabicyclo[3.3.1nonane Dimer"]. Organic Syntheses. http://www.orgsyn.org/demo.aspx?prep=cv9p0095. ; Collective Volume, 9, pp. 95 
  7. Bishop, Roger. "9-Thiabicyclo[3.3.1nonane-2,6-dione"]. Organic Syntheses. http://www.orgsyn.org/demo.aspx?prep=CV9P0692. ; Collective Volume, 9, pp. 692 
  8. Díaz, David; Converso, Antonella; Sharpless, K. Barry; Finn, M. G. (2006). "2,6-Dichloro-9-thiabicyclo[3.3.1nonane: Multigram Display of Azide and Cyanide Components on a Versatile Scaffold"]. Molecules 11 (4): 212–218. doi:10.3390/11040212. PMID 17962753. PMC 6148556. http://www.mdpi.org/molecules/papers/11040212.pdf. open access
  9. Schunn, R.; Ittel, S. (2007). "Bis(1,5-Cyclooctadiene)Nickel(0)". Inorganic Syntheses. 28. pp. 94–98. doi:10.1002/9780470132593.ch25. ISBN 978-0-470-13259-3. 
  10. Crascall, L; Spencer, J. (2007). "Olefin Complexes of Platinum". Inorganic Syntheses. 28. pp. 126–132. doi:10.1002/9780470132593.ch34. ISBN 978-0-470-13259-3. 
  11. Whitesides, George M.; Goe, Gerald L.; Cope, Arthur C. (1969). "Irradiation of cis,cis-1,5-cyclooctadiene in the presence of copper(I) chloride". J. Am. Chem. Soc. 91 (10): 2608–2616. doi:10.1021/ja01038a036. 
  12. Boeckh, Dieter; Huisgen, Rolf; Noeth, Heinrich (1987). "Preparation and conformation of (E,E)-1,5-cyclooctadiene". J. Am. Chem. Soc. 109 (4): 1248–1249. doi:10.1021/ja00238a046. 
  13. Stöckmann, Henning; Neves, André A.; Day, Henry A.; Stairs, Shaun; Brindle, Kevin M.; Leeper, Finian J. (2011). "(E,E)-1,5-Cyclooctadiene: a small and fast click-chemistry multitalent". Chem. Commun. 47 (25): 7203–5. doi:10.1039/C1CC12161H. PMID 21611648.