Chemistry:Mercury selenide

From HandWiki
Mercury(II) selenide
Mercury(II) selenide unit cell
Names
IUPAC name
Mercury selenide
Identifiers
3D model (JSmol)
EC Number
  • 243-910-5
Properties
HgSe
Molar mass 279.55 g/mol
Appearance grey-black solid
Odor odorless
Density 8.266 g/cm3
Melting point 1,000 °C; 1,830 °F; 1,270 K
insoluble
Structure
sphalerite
Thermochemistry
178 J kg−1 K−1
247 kJ/mol
Hazards
GHS pictograms GHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
GHS Signal word Danger
H300, H310, H330, H373, H410
P260, P262, P264, P270, P271, P273, P280, P284, P301+310, P302+350, P304+340, P310, P314, P320, P321, P322, P330, P361, P363, P391, P403+233, P405, P501
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
3
1
Flash point Non-flammable
Related compounds
Other anions
Mercury oxide
Mercury sulfide
Mercury telluride
Other cations
Zinc selenide
Cadmium selenide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references

Mercury selenide (HgSe; sometimes mercury(II) selenide) is a chemical compound of mercury and selenium. It is a grey-black crystalline solid semi-metal with a sphalerite structure. The lattice constant is 0.608 nm.

HgSe occurs naturally as the mineral Tiemannite, and is a component of the "intimate mixture" of HgSe and Se known as HgSe2.[1]

Along with other II-VI compounds, colloidal nanocrystals of HgSe can be formed.

Applications

  • Selenium is used in filters in some steel plants to remove mercury from exhaust gases. The solid product formed is HgSe.
  • HgSe can be used as an ohmic contact to wide-gap II-VI semiconductors such as zinc selenide or zinc oxide.

Toxicity

HgSe is non-toxic as long as it is not ingested due to its insolubility. Toxic hydrogen selenide fumes can be evolved on exposure to acids. HgSe is a relatively stable compound which might mean that it is less toxic than elemental mercury or many organometallic mercury compounds. Selenium's ability to complex with mercury has been proposed as a reason for the lack of mercury toxicity in deep sea fish despite high mercury levels.[2]

See also

References

  1. Park, Chang-Woo; Smith, Donna M.; Pell, Michael A.; Ibers, James A. (1997). "Different Products from the Chemical and Electrochemical Reduction of 'HgSe2': [K(2.2.2-cryptand)]2[HgSe2] and [PPh4]2[Hg(Se4)2]·en". Inorg. Chem. 36 (5): 942–943. doi:10.1021/ic960786v. 
  2. Watanabe, C. (2002). "Modification of Mercury Toxicity by Selenium: Practical Importance?". The Tohoku Journal of Experimental Medicine 196 (2): 71–77. doi:10.1620/tjem.196.71. PMID 12498318. 

External links