Physics:Microphonism

From HandWiki
Condenser microphone with shock mount to avoid microphonism

Microphonism is the effect of unwanted modulation that is produced mechanically in an electronic circuit. It often may be alleviated by embedding the circuit in paraffin or silicone, or using some type of elastic suspension (rubber or caoutchouc are widely used).

When an oscillator is subjected to a mechanical action such as vibration or shock, its oscillation frequency changes and the result is a signal at the base oscillator frequency, frequency-modulated by the mechanical signal.

The usual test for microphonism in electron tubes is to tap the tube with a finger, light mallet, or small rubber ball while working as amplifier or oscillator.[1]

Avoiding microphonism

In order to avoid microphonism, particularly in the input stages of high-gain amplifiers, design engineers used to shock-mount the tube-socket assemblies in these stages by means of small rubber grommets placed in the screw holes, leaving them in a "floating" situation.[2]

Microwave tube designers used to take numerous steps to reduce microphonism in klystrons. Where tuning was essential, a compromise usually was made between the resistance of the klystron to microphonism and the obtainable performance.[3]

See also

References

  1. Acta Technica. Magyar Tudomʹanyos Akadʹemia. 1956. https://books.google.com/books?id=dKAIAQAAIAAJ&q=microphonism. Retrieved 17 April 2013. 
  2. Granino Arthur Korn; Theresa M. Korn (1956). Electronic analog computers (d-c analog computers). McGraw-Hill. https://books.google.com/books?id=l4BQAAAAMAAJ&q=microphonism. Retrieved 17 April 2013. 
  3. Electronics. McGraw-Hill Publishing Company. July 1956. https://books.google.com/books?id=_DkjAQAAMAAJ&q=microphonism. Retrieved 17 April 2013.