Finance:Expenditure function

In microeconomics, the expenditure function gives the minimum amount of money an individual needs to spend to achieve some level of utility, given a utility function and the prices of the available goods. Formally, if there is a utility function [math]\displaystyle{ u }[/math] that describes preferences over n commodities, the expenditure function

[math]\displaystyle{ e(p, u^*) : \textbf R^n_+ \times \textbf R \rightarrow \textbf R }[/math]

says what amount of money is needed to achieve a utility [math]\displaystyle{ u^* }[/math] if the n prices are given by the price vector [math]\displaystyle{ p }[/math]. This function is defined by

[math]\displaystyle{ e(p, u^*) = \min_{x \in \geq(u^*)} p \cdot x }[/math]

where

[math]\displaystyle{ \geq(u^*) = \{x \in \textbf R^n_+ : u(x) \geq u^*\} }[/math]

is the set of all bundles that give utility at least as good as [math]\displaystyle{ u^* }[/math].

Expressed equivalently, the individual minimizes expenditure [math]\displaystyle{ x_1p_1+\dots +x_n p_n }[/math] subject to the minimal utility constraint that [math]\displaystyle{ u(x_1, \dots , x_n) \ge u^*, }[/math] giving optimal quantities to consume of the various goods as [math]\displaystyle{ x_1^*, \dots x_n^* }[/math] as function of [math]\displaystyle{ u^* }[/math] and the prices; then the expenditure function is

[math]\displaystyle{ e(p_1, \dots , p_n ; u^*)=p_1 x_1^*+\dots + p_n x_n^*. }[/math]

Features of Expenditure Functions

(Properties of the Expenditure Function) Suppose u is a continuous utility function representing a locally non-satiated preference relation º on Rn +. Then e(p, u) is

1.   Homogeneous of degree one in p: for all and [math]\displaystyle{ \lambda \gt 0 }[/math], [math]\displaystyle{ e(\lambda p,u)=\lambda e(p,u); }[/math]

2.   Continuous in [math]\displaystyle{ p }[/math] and [math]\displaystyle{ u; }[/math]

3.   Nondecreasing in [math]\displaystyle{ p }[/math] and strictly increasing in [math]\displaystyle{ u }[/math] provided [math]\displaystyle{ p \gg 0 ; }[/math]

4.   Concave in [math]\displaystyle{ p }[/math]

5. If the utility function is strictly quasi-concave, there is the Shephard's lemma

Proof

(1) As in the above proposition, note that

[math]\displaystyle{ e(\lambda p,u)=\min_{x\in\mathbb{R}^n_+ :u(x)\geq u} }[/math] [math]\displaystyle{ \lambda p\cdot x=\lambda \min_{x\in\mathbb{R}^n_+ :u(x)\geq u} }[/math] [math]\displaystyle{ p\cdot x=\lambda e(p,u) }[/math]

(2) Continue on the domain [math]\displaystyle{ e }[/math]: [math]\displaystyle{ \textbf R_{++}^N*\textbf R\rightarrow \textbf R }[/math]

(3) Let [math]\displaystyle{ p^\prime\gt p }[/math] and suppose [math]\displaystyle{ x \in h(p^\prime,u) }[/math]. Then [math]\displaystyle{ u(h)\geq u }[/math], and [math]\displaystyle{ e(p^\prime,u)=p^\prime\cdot x\geq p \cdot x }[/math] . It follows immediately that [math]\displaystyle{ e(p,u)\leq e(p^\prime,u) }[/math].

For the second statement , suppose to the contrary that for some [math]\displaystyle{ u^\prime \gt u }[/math], [math]\displaystyle{ e(p,u^\prime)\leq e(p,u) }[/math] Than, for some [math]\displaystyle{ x \in h(p,u) }[/math], [math]\displaystyle{ u(x)=u^\prime\gt u }[/math], which contradicts the "no excess utility" conclusion of the previous proposition

(4)Let [math]\displaystyle{ t \in(0,1) }[/math] and suppose [math]\displaystyle{ x \in h(tp+(1-t)p^\prime) }[/math]. Then, [math]\displaystyle{ p \cdot x\geq e(p,u) }[/math] and [math]\displaystyle{ p^\prime \cdot x\geq e(p^\prime,u) }[/math], so [math]\displaystyle{ e(tp+(1-t)p^\prime,u)=(tp+(1-t)p^\prime)\cdot x\geq }[/math][math]\displaystyle{ te(p,u)+(1-t)e(p^\prime,u) }[/math].

(5) [math]\displaystyle{ \frac{\delta(p^0,u^0)}{\delta p_i}=x^h_i(p^0,u^0) }[/math]

Expenditure and indirect utility

The expenditure function is the inverse of the indirect utility function when the prices are kept constant. I.e, for every price vector [math]\displaystyle{ p }[/math] and income level [math]\displaystyle{ I }[/math]:

[math]\displaystyle{ e(p, v(p,I)) \equiv I }[/math]

There is a duality relationship between expenditure function and utility function. If given a specific regular quasi-concave utility function, the corresponding price is homogeneous, and the utility is monotonically increasing expenditure function, conversely, the given price is homogeneous, and the utility is monotonically increasing expenditure function will generate the regular quasi-concave utility function. In addition to the property that prices are once homogeneous and utility is monotonically increasing, the expenditure function usually assumes

(1) is a non-negative function, i.e., [math]\displaystyle{ E(P \cdot u)\gt O; }[/math]

(2) For P, it is non-decreasing, i.e., [math]\displaystyle{ E(p^1 u)\gt E(p^2 u),u\gt Op^l\gt p^2\gt O_N }[/math];

(3)E(Pu) is a concave function. That is, [math]\displaystyle{ e(np^l+(1-n)p^2)u )\gt \lambda E(p^1u)(1-n)E(p^2u)y\gt 0 }[/math] [math]\displaystyle{ O\lt \lambda\lt 1p^l\geq O_Np^2 \geq O_N }[/math]

Expenditure function is an important theoretical method to study consumer behavior. Expenditure function is very similar to cost function in production theory. Dual to the utility maximization problem is the cost minimization problem

Example

Suppose the utility function is the Cobb-Douglas function [math]\displaystyle{ u(x_1, x_2) = x_1^{.6}x_2^{.4}, }[/math] which generates the demand functions

[math]\displaystyle{ x_1(p_1, p_2, I) = \frac{ .6I}{p_1} \;\;\;\; {\rm and}\;\;\; x_2(p_1, p_2, I) = \frac{ .4I}{p_2}, }[/math]

where [math]\displaystyle{ I }[/math] is the consumer's income. One way to find the expenditure function is to first find the indirect utility function and then invert it. The indirect utility function [math]\displaystyle{ v(p_1, p_2, I) }[/math] is found by replacing the quantities in the utility function with the demand functions thus:

[math]\displaystyle{ v(p_1, p_2,I) = u(x_1^*, x_2^*) = (x_1^*)^{.6}(x_2^*)^{.4} = \left( \frac{ .6I}{p_1}\right)^{.6} \left( \frac{ .4I}{p_2}\right)^{.4} = (.6^{.6} \times .4^{.4})I^{.6+.4}p_1^{-.6} p_2^{-.4} = K p_1^{-.6} p_2^{-.4}I, }[/math]

where [math]\displaystyle{ K = (.6^{.6} \times .4^{.4}). }[/math] Then since [math]\displaystyle{ e(p_1, p_2, u) = e(p_1, p_2, v(p_1, p_2, I)) =I }[/math] when the consumer optimizes, we can invert the indirect utility function to find the expenditure function:

[math]\displaystyle{ e(p_1, p_2, u) = (1/K) p_1^{.6} p_2^{.4}u, }[/math]

Alternatively, the expenditure function can be found by solving the problem of minimizing [math]\displaystyle{ (p_1x_1+ p_2x_2) }[/math] subject to the constraint [math]\displaystyle{ u(x_1, x_2) \geq u^*. }[/math] This yields conditional demand functions [math]\displaystyle{ x_1^*(p_1, p_2, u^*) }[/math] and [math]\displaystyle{ x_2^*(p_1, p_2, u^*) }[/math] and the expenditure function is then

[math]\displaystyle{ e(p_1, p_2, u^*) = p_1x_1^*+ p_2x_2^* }[/math]

See also

• Expenditure minimization problem
• Hicksian demand function
• Slutsky equation
• Utility maximization problem
• Budget constraint
• Consumption set
• Shephard's lemma

Further reading

• Mas-Colell, Andreu; Whinston, Michael D.; Green, Jerry R. (2007). Microeconomic Theory. pp. 59–60. ISBN 978-0-19-510268-0. https://archive.org/details/isbn_9780198089537/page/59. 
• Mathis, Stephen A.; Koscianski, Janet (2002). Microeconomic Theory: An Integrated Approach. Upper Saddle River: Prentice Hall. pp. 132–133. ISBN 0-13-011418-9. 
• Varian, Hal R. (1984). Microeconomic Analysis (Second ed.). New York: W. W. Norton. pp. 121–123. ISBN 0-393-95282-7.