Engineering:Adamoli-Cattani fighter

From HandWiki
Short description: Prototype fighter aircraft of Italy
Adamoli-Cattani fighter
Role Fighter
National origin Italy
Manufacturer Farina and Officine MoncenisioEwed
Designer Signori Adamoli & Cattani[1]
First flight 1918
Number built 1[1]

The Adamoli-Cattani fighter was a prototype fighter aircraft designed as a private venture by two Italian aircraft builders in 1918.

Design and development

The Adamoli-Cattani was intended to be the smallest practical biplane around the most powerful engine available to them, a 149 kW (200 hp) le Rhône M. The result was a reasonably conventional design, other than that the wings featured hinged leading edges in place of conventional ailerons. The Farina Coach Building factory in Turin began construction of the prototype; the Officine Moncenisio in Condove completed it.[1]

Operational history

Upon completion, ground testing revealed that the engine as installed could only deliver some 80% of its rated power, thus leaving the aircraft significantly underpowered. Limited tests continued until the end of World War I, when the Armistice made further development superfluous.[1]

Specifications (estimated performance with 200hp engine)

Three-view diagram

Data from The Complete Book of Fighters[1]

General characteristics

  • Crew: 1
  • Length: 6.10 m (20 ft 0 in)
  • Wingspan: 8.60 m (28 ft 3 in)
  • Empty weight: 470 kg (1,036 lb)
  • Gross weight: 675 kg (1,488 lb)
  • Powerplant: 1 × le Rhône M 9-cyl. air-cooled rotary piston engine, 150 kW (200 hp) (rating) - actual power 119 kW (160 hp)

Performance

  • Maximum speed: 186 km/h (116 mph, 100 kn)
  • Endurance: 2.25

Armament

See also

Comparable aircraft:

  • Nieuport-Delage Ni-D 29

References

  1. 1.0 1.1 1.2 1.3 1.4 Green, William; Gordon Swanborough (1997). The Complete Book of Fighters. London: Salamander Books Limited. p. 8. ISBN 1-85833-777-1.