Chemistry:Dithiocarbamate

From HandWiki
Short description: Chemical group (>N–C(=S)–S–)
General chemical structure of dithiocarbamate esters. R and R" is any group (typically hydrogen or organyl), and R' is organyl.

In organic chemistry, a dithiocarbamate is a functional group with the general formula R
2
N–C(=S)–S–R
and structure >N–C(=S)–S–. It is the analog of a carbamate in which both oxygen atoms are replaced by sulfur atoms (when only 1 oxygen is replaced the result is thiocarbamate).

Dithiocarbamate also refers to the dithiocarbamate ion R
2
N–CS
2
and its salts. A common example is sodium diethyldithiocarbamate. Dithiocarbamates and their derivatives are widely used in the vulcanization of rubber.[1]

Formation

Many secondary amines react with carbon disulfide and sodium hydroxide to form dithiocarbamate salts:[2]

R
2
NH + CS
2
+ NaOH → R
2
NCS
2
Na+
+ H
2
O

Ammonia reacts with CS2 similarly:

2 NH3 + CS2 → H2NCS2NH4+

Dithiocarbamate salts are pale colored solids that are soluble in water and polar organic solvents.

Dithiocarbamic acid

A primary amine and carbon disulfide react to give a dithiocarbamic acid:

RNH
2
+ CS
2
→ R(H)NCS
2
H

In the presence of diimides or pyridine, these acids convert to isothiocyanates:[3]

R(H)NCS
2
H + C(=NR')
2
→ RN=C=S + S=C(NHR')
2

Reactions

Dithiocarbamates are readily S-alkylated. Thus, methyl dimethyldithiocarbamate can be prepared by methylation of the dithiocarbamate:[4]

(CH3)2NCS2Na + (CH3O)2SO2 → (CH3)2NC(S)SCH3 + Na[CH3OSO3]

Oxidation of dithiocarbamates gives the thiuram disulfide:

2 R2NCS2 → [R2NC(S)S]2 + 2e

Thiuram disulfides react with Grignard reagents to give esters of dithiocarbamic acid:[5]

[R2NC(S)S]2 + R'MgX → R2NC(S)SR' + R2NCS2MgX

Dithiocarbamates react with transition metal salts to give a wide variety of transition metal dithiocarbamate complexes.

Structure and bonding

Dithiocarbamates are described by invoking resonance structures that emphasize the pi-donor properties of the amine group. This bonding arrangement is indicated by a short C–N distance and the coplanarity of the NCS2 core as well as the atoms attached to N.[6]

Main resonance structures of a dithiocarbamate anion.

Because of the pi-donation from nitrogen, dithiocarbamates are more basic than structurally related anions such as dithiocarboxylates and xanthates. Consequently, they tend to bind as bidentate ligands. Another consequence of the C–N multiple bonding is that rotation about that bond is subject to a high barrier.

Applications

Several transition metal dithiocarbamate complexes are useful in industry. Zinc dithiocarbamates are used to modify the crosslinking of certain polyolefins with sulfur, a process called vulcanization. They are used as ligands for chelating metals.[7]

Structure of the dimethyldithiocarbamate of zinc.

Some dithiocarbamates, specifically ethylene bisdithiocarbamates (EBDCs), in the form of complexes with manganese (maneb), zinc (zineb) or a combination of manganese and zinc (mancozeb), have been used extensively as fungicides in agriculture since the 1940s.[8] In the United States they began to be registered for use in the late 1950s and early 1960s and were quickly put to work on sooty blotch and flyspeck.[9] Many growers switched from captan to EBDCs for the longer residual period.[9] Both captan and EBDCs were the primary treatments for SBFS in that country until the early 1990s when the US Environmental Protection Agency banned EBDCs within 77 days to harvest.[9] This effectively made summer use impossible, reduced EBDC use overall, and radically increased SBFS.[9]

Methylenebis(dibutyldithiocarbamate) is an additive in some extreme pressure gear oils, serving as an antioxidant and protecting metal surfaces.[10]

See also

References

  1. Engels, Hans-Wilhelm. "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a23_365.pub2. 
  2. Rüdiger Schubart (2000). "Dithiocarbamic Acid and Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a09_001. ISBN 3-527-30673-0. 
  3. Smith, Michael B.; March, Jerry (2007), Advanced Organic Chemistry: Reactions, Mechanisms, and Structure (6th ed.), New York: Wiley-Interscience, p. 1297, ISBN 978-0-471-72091-1, https://books.google.com/books?id=JDR-nZpojeEC&printsec=frontcover 
  4. A. D. Ainley; W. H. Davies; H. Gudgeon; J. C. Harland; W. A. Sexton (1944). "The Constitution of the So-Called Carbothialdines and the Preparation of Some Homologous Compounds". J. Chem. Soc.: 147–152. doi:10.1039/JR9440000147. 
  5. John R. Grunwell (1970). "Reaction of Grignard Reagents with Tetramethylthiuram Disulfide [yielding dithiocarbamates]". J. Org. Chem. 35 (5): 1500–1501. doi:10.1021/jo00830a052. 
  6. Coucouvanis, Dimitri (1979). "The chemistry of the dithioacid and 1,1-dithiolate complexes, 1968–1977". Prog. Inorg. Chem.. Progress in Inorganic Chemistry 26: 301–469. doi:10.1002/9780470166277.ch5. ISBN 978-0-470-16627-7. 
  7. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8. 
  8. "A Short History of Fungicides". The American Phytopathological Society. http://www.apsnet.org/publications/apsnetfeatures/Pages/Fungicides.aspx. 
  9. 9.0 9.1 9.2 9.3 Gleason, Mark L.; Zhang, Rong; Batzer, Jean C.; Sun, Guangyu (2019-08-25). "Stealth Pathogens: The Sooty Blotch and Flyspeck Fungal Complex". Annual Review of Phytopathology (Annual Reviews) 57 (1): 135–164. doi:10.1146/annurev-phyto-082718-100237. ISSN 0066-4286. PMID 31150591. 
  10. Theo Mang; Jürgen Braun; Wilfried Dresel; Jürgen Omeis (2011). "Lubricants, 2. Components". Ullmanns Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.o15_o04. ISBN 978-3-527-30673-2.