Chemistry:2-Methylglutaronitrile

From HandWiki
2-Methylglutaronitrile
2-Methylglutaronitril Struktur.svg
Names
Preferred IUPAC name
2-Methylpentanedinitrile
Other names
1,3-Dicyanobutane, α-Methylvalerodinitrile
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 224-923-5
MeSH C480967
UNII
Properties
C6H8N2
Molar mass 108.144 g·mol−1
Appearance colorless liquid
Density 0.9548 g/cm3
Melting point −45 °C (−49 °F; 228 K)
Boiling point 263 °C (505 °F; 536 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references
Tracking categories (test):

2-Methylglutaronitrile is the organic compound with the formula NCCH2CH2CH(CH3)CN. This dinitrile is obtained in the large-scale synthesis of adiponitrile. It is a colorless liquid with an unpleasant odor. It is the starting compound for the vitamin nicotinamide and for the diester dimethyl-2-methylglutarate and the ester amide methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate, which are promoted as green solvents. 2-Methylglutaronitrile is chiral but is mainly encountered as the racemate.

Occurrence and production

2-Methylglutaronitrile is a by-product of the production of adiponitrile, the precursor of hexamethylenediamine and adipic acid as building blocks for nylon 66.

Starting from 1,3-butadiene or a butadiene-rich C4-section (> 40% by volume) from a naphtha steamcracker in the first stage a mixture of pentenenitriles is obtained through hydrocyanation (using as catalyst Ni0-phosphine [PR3][1] or phosphite or phosphonite [P(OR)2R][2]). The mixture contains mainly trans-3-pentenenitrile in addition to the isomers 2-methyl-2-butenenitrile, 4-pentenenitrile and 2-pentenenitrile.

1,3-Butsdien zu Pentennitrilen

The mixture of monoolefinic C5 mononitriles is isomerized to 3- and 4-pentenenitrile with a hydrocyanation catalyst and a Lewis acid (such as ZnCl2).[2] In the third step, the mixture is reacted with hydrogen cyanide to give a mixture of dinitriles which contains in addition to 2-methylglutaronitrile also adiponitrile and 2-ethylbutanedinitrile.

Umsetzung von Pentennitrilen zu Dinitrilen

2-Methylglutaronitrile can be separated by fractional distillation.[3]

The 2-methylglutaronitrile-rich fraction has hitherto been combusted as an undesired by-product of adiponitrile production, having the typical composition of about 86 wt% 2-methylglutaronitrile, 11 wt% 2-succinonitrile and 3 wt% adiponitrile.[4][5]

Applications

2-methylglutaronitrile can be converted to 3-methylpyridine (β-picoline) by partial hydrogenation.[6][7]

3-Methylpyridin aus 2-MGN

In addition to 3-methylpyridine, 3-methylpiperidine is obtained as a by-product from which further 3-methylpyridine can be obtained by dehydrogenation.

Ammonoxidation of 3-methylpyridine on transition metal contacts yields 3-cyanopyridine (nicotinonitrile) in yields of 95%.[8]

Nicotinsäureamid aus 3-Methylpyridin

Hydrogenation of a solution of 2-methylglutaronitrile in ethanol in the presence of Raney cobalt at 15 bar and 100 °C yields 2-methylpentane-1,5-diamine.[9]

2-Methylpentan-1,5-diamin aus 2-Methylglutaronitril

2-Methylpentanediamine can be converted to 3-methylpiperidine at 300 to 400 °C on a zeolite contact and then dehydrated on a palladium contact to 3-methylpyridine, which can be converted via nicotinonitrile into nicotinamide.[10]

The racemic diamine can also be used for the preparation of specific polyamides and after reaction with phosgene to form 2-methylpentane diisocyanate[11] as a reaction component in polyurethanes. Nitrilases regioselectively hydrolyze the ω-nitrile group in α, ω-dinitriles without detectable amide intermediate directly to the carboxyl group. 4-cyanopentanoic acid is formed in high yield.[12]

4-Cyanopentansäure aus 2-Methylglutaronitril

The ammonium salt of 4-cyanopentanoic acid can be converted by catalytic hydrogenation in the presence of methylamine in 1,5-dimethyl-2-piperidone,[13][14] an environmentally compatible solvent.[15]

Synthese von 1,5-Dimethyl-2-piperidon

The hydrolysis of both nitrile groups of 2-methylglutaronitrile with e.g. 20% sodium hydroxide solution at 50 °C and subsequent acidification produces 2-methylglutaric acid.[16]

2-Methylglutarsäure aus 2-Methylglutraronitril

Starting from 2-methylglutaronitrile the hydrolysis to 2-methylglutaric acid can also be accomplished via the 2-methylglutarimide obtained by heating a 2-methylglutaronitrile/water mixture to 275 °C in the presence of a titanium dioxide catalyst in yields of 94%.[17]

2-MGN-Imid aus 2-Methylglutaronitril

Hydrolysis in the alkaline provides 2-methyl glutaric acid.

The reaction of 2-methylglutarimide with e.g. methanol (methanolysis) produces the diester dimethyl-2-methylglutarate[18] in the presence of titanium dioxide[4] or lanthanum oxide.[19] It was commercialized as an environmentally friendly aprotic dipolar solvent under the name Rhodiasolv IRIS with the typical composition 87-89% dimethyl-2-methylglutarate, 9-11% dimethyl 2-ethylbutanedioate and 1-2% dimethyl hexanedioate[5] as a substitute for acetone, dichloromethane, N-methylpyrrolidone and the like.

Diester aus 2-MGN-Imid

The ester mixture is very similar to so-called dibasic esters, which are commercially available as FlexiSolv DBE esters.[20]

The diester can be selectively converted into a mixture of 1- or 5-substituted methyl ester amides with dimethylamine in methanol/sodium methoxide,[21] which is used under the name Rhodiasolv Polarclean as formulation auxiliaries for crop protection preparations.[5] The resulting ester amides are readily biodegradable and good solvents for a variety of different plant protection agents (such as insecticides or fungicides), also compared to the frequently used N-methylpyrrolidone, cyclohexanone or isophorone.

Other esteramides are derived, e. g. from 2-methylglutaronitrile which, after alkaline hydrolysis, is converted into 2-methylglutaric acid, cyclized with acetic anhydride to give 2-methylglutaric anhydride, reacted with dimethylamine to form the monoamide, reacted to an acid chloride with thionyl chloride and formed to an ester with more hydrophobic alcohols (like butanols or cyclohexanol).[22]

References

  1. ↑ M. Huser, R. Perron, "Process for the hydrocyanation of organic compounds containing ethylenic unsaturation", US patent 5856555, published 1999-01-05, assigned to Rhone-Poulenc Fiber & Resin Intermediates
  2. ↑ 2.0 2.1 J. Fischer, W. Siegel, "Catalyst comprising at least one phosphonite ligand based Nickel (0) complex and method for the production of nitriles", US patent 6242633, published 2001-06-05, assigned to BASF AG
  3. ↑ T. Jungkamp, R. Baumann, M. Bartsch, G. Haderlein, H. Luyken, J. Scheidel, "Method for producing dinitriles", US patent 7816551, published 2010-10-19, assigned to BASF AG
  4. ↑ 4.0 4.1 P. Leconte, P. Marion, R. Jacquot, "Preparation of diesters from imide/dinitrile compounds", US patent 8053594, published 2011-11-08, assigned to Rhodia Operations
  5. ↑ 5.0 5.1 5.2 Vidal, T. (14 June 2012). "Sustainable Solvents Products and Process Innovations". http://www.chemspeceurope.com/content-images/main/Conferences/Sustainable-Solvents-Products-and-Process-Innovations_Thierry-Vidal_-RSC-Symposium-2012.pdf. Retrieved 2016-04-28. 
  6. ↑ E.J. Newson, T.-B. Truong, "Verfahren zur Herstellung von 3-Methylpyridin", CH patent 654576, published 1986-02-28, assigned to Lonza AG
  7. ↑ R. DiCosimo, J.D. Burrington, D.D. Suresh, "Process for making 3-cyanopyridine", US patent 4876348, published 1989-10-24, assigned to The Standard Oil Co.
  8. ↑ Abe, Nobuyuki; Ichimura, Hisao; Kataoka, Toshiaki; Morishita, Sinji; Shimizu, Shinkichi; Shoji, Takayuki; Watanabe, Nanao (2007). "Ullmann's Encyclopedia of Industrial Chemistry". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_399. 
  9. ↑ G. Cordier, "Preparation of 2-methylpentadiamine", US patent 4987263, published 1991-01-22, assigned to Rhone-Poulenc Chimie
  10. ↑ J. Heveling, E. Armbruster, L. Utiker, M. Rohner, H.-R. Dettwiler, R.J. Chuck, "Process for preparing nicotinamide", US patent 5719045, published 1998-02-17, assigned to Lonza AG
  11. ↑ P. Pfab, E. Ströfer, C. Knösche, E. Schwab, M. Klötzer, G. Georgi, "Process for preparing 2-methylpentane-1,5-diisocyanate from methylglutaronitrile", WO patent 2008074645, published 2008-06-26, assigned to BASF SE
  12. ↑ R. DiCosimo, R.D. Fallon, J.E. Gavagan, "Process for preparing 4-cyanopentanoic acid", US patent 6551804, published 2003-04-22, assigned to E.I. Du Pont de Nemours and Co.
  13. ↑ R. DiCosimo, R.D. Fallon, J.E. Gavagan, F.E. Herkes, "Preparation of lactams from aliphatic α, ω-dinitriles", US patent 5814508, published 1998-09-29, assigned to E.I. Du Pont de Nemours and Co.
  14. ↑ F.B. Cooling (2001). "Chemoenzymatic production of 1,5-dimethyl-2-piperidone". Journal of Molecular Catalysis B: Enzymatic 11 (4–6): 295–306. doi:10.1016/S1381-1177(00)00150-8. 
  15. ↑ G. Wojcik, "Composition and process for cleaning inks from various substrates including printing plates", US patent 6261381, published 2001-07-17, assigned to MacDermid, Inc.
  16. ↑ INVISTA, Technical Information, DYTEK Methylglutaronitrile (MGN)
  17. ↑ R. Jacquot, B. Rhers, "Process for preparing diacid compounds", US patent 20150175515, published 2015-06-25, assigned to Rhodia Operations
  18. ↑ Solvay: GPS Safety Summary, Dimethyl 2-methylglutarate
  19. ↑ R. Jacquot, P. Leconte, "Production of diesters from dinitrile compounds", US patent 20120071686, published 2012-03-22
  20. ↑ INVISTA's DBE esters, FlexiSolv DBE esters
  21. ↑ T. Vidal, R. Rached, M. Guglieri, "Process for preparing esteramide compounds", US patent 20130237722, published 2013-09-12, assigned to Rhodia Operations
  22. ↑ O. Jentzer, M. Guglieri, "Use of esteramides as solvents, novel esteramides and process for preparing esteramides", US patent 20140221211, published 2014-08-07, assigned to Rhodia Operations





Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:2-Methylglutaronitrile&oldid=3337526"