Engineering:Screw

From HandWiki
(Redirected from Engineering:Wood screw)
Short description: Type of fastener characterized by a thread wrapped around a cylinder core
An assortment of screws, and a US quarter for size comparison
A wood screw: a) head; b) non-threaded shank; c) threaded shank; d) tip
The six classical simple machines

A screw is an externally helical threaded fastener capable of being tightened or released by a twisting force (torque) to the head. The most common uses of screws are to hold objects together and there are many forms for a variety of materials. Screws might be inserted into holes in assembled parts or a screw may form its own thread.[1]

The screw has a head on one end that requires it to be turned with a tool. Common tools for driving screws include screwdrivers, wrenches and keys. The head is usually larger than the body, which provide a bearing surface and keeps the screw from being driven deeper than its length; an exception being the set screw (aka grub screw). The cylindrical portion of the screw from the underside of the head to the tip is called the shank; it may be fully or partially threaded with the distance between each thread called the pitch.[2][3]

Most screws are tightened by clockwise rotation, which is called a right-hand thread.[4][5] Screws with a left-hand thread are used in exceptional cases, such as where the screw will be subject to counterclockwise torque, which would tend to loosen a right-hand screw. For this reason, the left-side pedal of a bicycle has a left-hand thread.Cite error: Closing </ref> missing for <ref> tag[6][7] The difference between a screw and a bolt is that the latter is designed to be tightened or released by torquing a nut.


History

A lathe of 1871, equipped with leadscrew and change gears for single-point screw-cutting
A Brown & Sharpe single-spindle screw machine

Fasteners had become widespread involving concepts such as dowels and pins, wedging, mortises and tenons, dovetails, nailing (with or without clenching the nail ends), forge welding, and many kinds of binding with cord made of leather or fiber, using many kinds of knots. The screw was one of the last of the simple machines to be invented.[8] It first appeared in Mesopotamia during the Neo-Assyrian period (911-609) BC,[9] and then later appeared in Ancient Egypt and Ancient Greece [10][11] where it was described by the Greek mathematician Archytas of Tarentum (428–350 BC). By the 1st century BC, wooden screws were commonly used throughout the Mediterranean world in screw presses for pressing olive oil from olives and for pressing juice from grapes in winemaking. The first documentation of the screwdriver is in the medieval Housebook of Wolfegg Castle, a manuscript written sometime between 1475 and 1490.[12] However they probably did not become widespread until after 1800, once threaded fasteners had become commodified.[13]

Metal screws used as fasteners were rare in Europe before the 15th century, if known at all.[14] The metal screw did not become a common fastener until machine tools for mass production developed toward the end of the 18th century. This development blossomed in the 1760s and 1770s.[15] along two separate paths that soon converged:[16]

The first path was pioneered by brothers Job and William Wyatt of Staffordshire, UK,[17] who patented in 1760 a machine that one might today best call a screw machine of an early and prescient sort. It made use of a leadscrew to guide the cutter to produce the desired pitch,[17] and the slot was cut with a rotary file while the main spindle held still (presaging live tools on lathes 250 years later). Not until 1776 did the Wyatt brothers have a wood-screw factory up and running.[17] Their enterprise failed, but new owners soon made it prosper, and in the 1780s they were producing 16,000 screws a day with only 30 employees[18]—the kind of industrial productivity and output volume that would later become characteristic of modern industry but which was revolutionary at the time.


These developments of the 1760–1800 era, with the Wyatts and Maudslay as arguably the most important drivers, caused great increase in the use of threaded fasteners. Standardization of threadforms began almost immediately, but it was not quickly completed; it has been an evolving process ever since. Further improvements to the mass production of screws continued to push unit prices lower and lower for decades to come, throughout the 19th century.[19] The mass production of wood screws (meaning screws made of metal to be used in working with wood) in a specialized, single-purpose, high-volume-production machine tool; and the low-count, toolroom-style production of machine screws (V-thread) with easy selection among various pitches (whatever the machinist happened to need on any given day).

In 1821 Hardman Philips built the first screw factory in the United States – on Moshannon Creek, near Philipsburg – for the manufacture of blunt metal screws. An expert in screw manufacture, Thomas Lever, was brought over from England to run the factory. The mill used steam and water power, with hardwood charcoal as fuel. The screws were made from wire prepared by "rolling and wire drawing apparatus" from iron manufactured at a nearby forge. The screw mill was not a commercial success. It eventually failed due to competition from the lower-cost, gimlet-pointed screw, and ceased operations in 1836.[20]

The American development of the turret lathe (1840s) and of automatic screw machines derived from it (1870s) drastically reduced the unit cost of threaded fasteners by increasingly automating the machine-tool control. This cost reduction spurred ever greater use of screws.

Throughout the 19th century, the most commonly used forms of screw head (that is, drive types) were simple internal-wrenching straight slots and external-wrenching squares and hexagons. These were easy to machine and served most applications adequately. Rybczynski describes a flurry of patents for alternative drive types in the 1860s through 1890s,[21] but explains that these were patented but not manufactured due to the difficulties and expense of doing so at the time. In 1908, Canadian P. L. Robertson was the first to make the internal-wrenching square socket drive a practical reality by developing just the right design (slight taper angles and overall proportions) to allow the head to be stamped easily but successfully, with the metal cold forming as desired rather than being sheared or displaced in unwanted ways.[21] Practical manufacture of the internal-wrenching hexagon drive (hex socket) shortly followed in 1911.[22][23]

In the early 1930s American Henry F. Phillips popularized the Phillips-head screw.[24]

Threadform standardization further improved in the late 1940s, when the ISO metric screw thread and the Unified Thread Standard were defined.

Precision screws, for controlling motion rather than fastening, developed around the turn of the 19th century, and represented one of the central technical advances, along with flat surfaces, that enabled the industrial revolution.[25] They are key components of micrometers and lathes.

Manufacture

Bolt Forming.svg
Screw (bolt) 13-n.PNG

There are three steps in manufacturing a screw: heading, thread rolling, and coating. Screws are normally made from wire, which is supplied in large coils, or round bar stock for larger screws. The wire or rod is then cut to the proper length for the type of screw being made; this workpiece is known as a blank. It is then cold headed, which is a cold working process. Heading produces the head of the screw. The shape of the die in the machine dictates what features are pressed into the screw head; for example a flat head screw uses a flat die. For more complicated shapes two heading processes are required to get all of the features into the screw head. This production method is used because heading has a very high production rate, and produces virtually no waste material. Slotted head screws require an extra step to cut the slot in the head; this is done on a slotting machine. These machines are essentially stripped down milling machines designed to process as many blanks as possible.

The blanks are then polished[citation needed] again prior to threading. The threads are usually produced via thread rolling; however, some are cut. The workpiece is then tumble finished with wood and leather media to do final cleaning and polishing.[citation needed] For most screws, a coating, such as electroplating with zinc (galvanizing) or applying black oxide, is applied to prevent corrosion.


Types of screws

Threaded fasteners either have a tapered shank or a non-tapered shank. Fasteners with tapered shanks are designed to either be driven into a substrate directly or into a pilot hole in a substrate, and most are classed as screws. Mating threads are formed in the substrate as these fasteners are driven in. Fasteners with a non-tapered shank are generally designed to mate with a nut or to be driven into a tapped hole, and most would be classed as bolts, although some are thread-forming (eg. taptite) and some authorities would treat some as screws when they are used with a female threaded fastener other than a nut.

Sheet-metal screws do not have the chip-clearing flute of self-tapping screws. However, some wholesale vendors do not distinguish between the two kinds.[26]

Wood screw

Early wood screws were made by hand, with a series of files, chisels, and other cutting tools, and these can be spotted easily by noting the irregular spacing and shape of the threads, as well as file marks remaining on the head of the screw and in the area between threads. Many of these screws had a blunt end, completely lacking the sharp tapered point on nearly all modern wood screws.[27] Some wood screws were made with cutting dies as early as the late 1700s (possibly even before 1678 when the book content was first published in parts).[28] Eventually, lathes were used to manufacture wood screws, with the earliest patent being recorded in 1760 in England.[27] During the 1850s, swaging tools were developed to provide a more uniform and consistent thread. Screws made with these tools have rounded valleys with sharp and rough threads.[29][30]

Once screw turning machines were in common use, most commercially available wood screws were produced with this method. These cut wood screws are almost invariably tapered, and even when the tapered shank is not obvious, they can be discerned because the threads do not extend past the diameter of the shank. Such screws are best installed after drilling a pilot hole with a tapered drill bit. The majority of modern wood screws, except for those made of brass, are formed on thread rolling machines. These screws have a constant diameter and threads with a larger diameter than the shank and are stronger because the rolling process does not cut the grain of the metal.[citation needed]

Machine screw

A machine screw in macro view

ASME standards specify a variety of machine screws (aka stove bolts[citation needed]) [31] in diameters ranging up to 0.75 in (19.05 mm).

A machine screw is generally a smaller fastener (less than 14 inch (6.35 mm) in diameter) threaded the entire length of its shank that usually has a recessed drive type (slotted, Phillips, etc.). Machine screws are also made with socket heads (see above), in which case they may be referred to as socket head machine screws.

Hex cap screw

ASME standard B18.2.1-1996 specifies hex cap screws whose size range is 0.25–3 in (6.35–76.20 mm) in diameter. In 1991, responding to an influx of counterfeit fasteners, Congress passed PL 101-592,[32] the "Fastener Quality Act". As a result, the ASME B18 committee re-wrote B18.2.1,[33] renaming finished hex bolts to hex cap screw – a term that had existed in common usage long before, but was now also being codified as an official name for the ASME B18 standard.

Lug bolt and head bolts are other terms that refer to fasteners that are designed to be threaded into a tapped hole that is in part of the assembly and so based on the Machinery's Handbook distinction they would be screws. Here common terms are at variance with Machinery's Handbook distinction.[34][35]

Lag screw

Lag screw, also called a lag bolt

Lag screws (US) or coach screws (UK, Australia, and New Zealand) (also referred to as lag bolts or coach bolts, although this is a misnomer) or French wood screw (Scandinavia) are large wood screws. Lag screws are used to lag together lumber framing, to lag machinery feet to wood floors, and for other heavy carpentry applications. The attributive modifier lag came from an early principal use of such fasteners: the fastening of lags such as barrel staves and other similar parts. These fasteners are "screws" according to the Machinery's Handbook criteria, and the obsolescent term "lag bolt" has been replaced by "lag screw" in the Handbook.[36] However, based on tradition many tradesmen continue to refer to them as "bolts", because, like head bolts, they are large, with hex or square heads that require a wrench, socket, or specialized bit to turn.

The head is typically an external hex. Metric hex-headed lag screws are covered by DIN 571. Inch square-headed and hex-headed lag screws are covered by ASME B18.2.1. A typical lag screw can range in diameter from 4 to 20 mm or #10 to 1.25 in (4.83 to 31.75 mm), and lengths from 16 to 200 mm or 14 to 6 in (6.35 to 152.40 mm) or longer, with the coarse threads of a wood-screw or sheet-metal-screw threadform (but larger). The materials are usually carbon steel substrate with a coating of zinc galvanization (for corrosion resistance). The zinc coating may be bright yellow (electroplated), or dull gray (hot-dip galvanized).

Bone screw

Implant that has been used for fixation of a broken wrist
Main page: Medicine:Internal fixation

Like aerospace and nuclear power, medical involves some of the highest technology for fasteners where performance, longevity, and quality are reflected in the price. Bone screws tend to be made of stainless steel or titanium, and they often have high-end features such as conical threads, multistart threads, cannulation (hollow core), and proprietary screw drive types (some not seen outside of these applications).

Screw heads

a — pan
b — dome (button)
c — round
d — truss (mushroom)
e — flat (countersunk)
f — oval (raised head)
Combination flanged-hex/Phillips-head screw used in computers

There are a variety of screw head shapes. Some varieties of screw are manufactured with a break-away head, which snaps off when adequate torque is applied. This prevents tampering.

Pan head
A low disc with a rounded, high outer edge with large surface area.
Button or dome head (BH)
Cylindrical with a rounded top.
Round head
A dome-shaped head used for decoration.[37]
Truss head
Lower-profile dome designed to prevent tampering.
Flat head
Conical, with flat outer face and tapering inner face allowing it to be countersunk into the material. The angle of the screw is measured as the aperture of the cone.
Bugle head
Similar to countersunk, but there is a smooth progression from the shank to the angle of the head, similar to the bell of a bugle.
Cheese head
Cylindrical.
Fillister head
Cylindrical, but with a slightly convex top surface.
Flanged head
A flanged head can be any of the above head styles (except the countersunk styles) with the addition of an integrated flange at the base of the head. This eliminates the need for a flat washer.
Hex head
Hex shaped, similar to the head of a hex bolt. Sometimes flanged.

Metric

The international standards for metric externally threaded fasteners are ISO 898-1 for property classes produced from carbon steels and ISO 3506-1 for property classes produced from corrosion resistant steels.

Inch

There are many standards governing the material and mechanical properties of imperial sized externally threaded fasteners. Some of the most common consensus standards for grades produced from carbon steels are ASTM A193, ASTM A307, ASTM A354, ASTM F3125, and SAE J429. Some of the most common consensus standards for grades produced from corrosion resistant steels are ASTM F593 & ASTM A193.


Tools

File:Screw-into-wood.ogg

The hand tool used to drive in most screws is called a screwdriver. A power tool that does the same job is a power screwdriver; power drills may also be used with screw-driving attachments. Where the holding power of the screwed joint is critical, torque-measuring and torque-limiting screwdrivers are used to ensure sufficient but not excessive force is developed by the screw. The hand tool for driving hex head threaded fasteners is a spanner (UK usage) or wrench (US usage), while a nut setter is used with a power screw driver.

Modern screws employ a wide variety of screw drive designs, each requiring a different kind of tool to drive in or extract them. The most common screw drives are the slotted and Phillips in the US; hex, Robertson, and Torx are also common in some applications, and Pozidriv has almost completely replaced Phillips in Europe.[citation needed] Some types of drive are intended for automatic assembly in mass-production of such items as automobiles. More exotic screw drive types may be used in situations where tampering is undesirable, such as in electronic appliances that should not be serviced by the home repair person.

Screw threads

Main page: Engineering:Screw thread

There are many systems for specifying the dimensions of screws, but in much of the world the ISO metric screw thread preferred series has displaced the many older systems. Other relatively common systems include the British Standard Whitworth, BA system (British Association), and the Unified Thread Standard.

ISO metric screw thread

Main page: Engineering:ISO metric screw thread

The basic principles of the ISO metric screw thread are defined in international standard ISO 68-1 and preferred combinations of diameter and pitch are listed in ISO 261. The smaller subset of diameter and pitch combinations commonly used in screws, nuts and bolts is given in ISO 262. The most commonly used pitch value for each diameter is the coarse pitch. For some diameters, one or two additional fine pitch variants are also specified, for special applications such as threads in thin-walled pipes. ISO metric screw threads are designated by the letter M followed by the major diameter of the thread in millimetres (e.g. M8). If the thread does not use the normal coarse pitch (e.g. 1.25 mm in the case of M8), then the pitch in millimeters is also appended with a multiplication sign (e.g. "M8×1" if the screw thread has an outer diameter of 8 mm and advances by 1 mm per 360° rotation).

The nominal diameter of a metric screw is the outer diameter of the thread. The tapped hole (or nut) into which the screw fits, has an internal diameter which is the size of the screw minus the pitch of the thread. Thus, an M6 screw, which has a pitch of 1 mm, is made by threading a 6 mm shank, and the nut or threaded hole is made by tapping threads into a hole of 5 mm diameter (6 mm – 1 mm).

Metric hexagon bolts, screws and nuts are specified, for example, in International Standards ISO 4014, ISO 4017, and ISO 4032. The following table lists the relationship given in these standards between the thread size and the maximum width across the hexagonal flats (wrench size):

ISO metric thread M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64
Wrench size (mm) 3.2 4 5 5.5 7 8 10 13 16 or 17 19 24 30 36 46 55 65 75 85 95

In addition, the following non-preferred intermediate sizes are specified:

ISO metric thread M3.5 M14 M18 M22 M27 M33 M39 M45 M52 M60
Wrench size (mm) 6 21 27 34 41 50 60 70 80 90

Bear in mind that these are just examples and the width across flats is different for structural bolts, flanged bolts, and also varies by standards organization.

Whitworth

Main page: Engineering:British Standard Whitworth

The first person to create a standard (in about 1841) was the England engineer Sir Joseph Whitworth. Whitworth screw sizes are still used, both for repairing old machinery and where a coarser thread than the metric fastener thread is required. Whitworth became British Standard Whitworth, abbreviated to BSW (BS 84:1956) and the British Standard Fine (BSF) thread was introduced in 1908 because the Whitworth thread was too coarse for some applications. The thread angle was 55°, and the depth and pitch varied with the diameter of the thread (i.e., the bigger the bolt, the coarser the thread). Spanners for Whitworth bolts are marked with the size of the bolt, not the distance across the flats of the screw head.

The most common use of a Whitworth pitch nowadays is in all UK scaffolding. Additionally, the standard photographic tripod thread, which for small cameras is 1/4" Whitworth (20 tpi) and for medium/large format cameras is 3/8" Whitworth (16 tpi). It is also used for microphone stands and their appropriate clips, again in both sizes, along with "thread adapters" to allow the smaller size to attach to items requiring the larger thread. Note that while 1/4" UNC bolts fit 1/4" BSW camera tripod bushes, yield strength is reduced by the different thread angles of 60° and 55° respectively.

British Association screw thread

Main page: Organization:British Association screw threads

British Association (BA) screw threads, named after the British Association for Advancement of Science, were devised in 1884 and standardised in 1903. Screws were described as "2BA", "4BA" etc., the odd numbers being rarely used, except in equipment made prior to the 1970s for telephone exchanges in the UK. This equipment made extensive use of odd-numbered BA screws, in order—it may be suspected—to reduce theft. BA threads are specified by British Standard BS 93:1951 "Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A."

While not related to ISO metric screws, the sizes were actually defined in metric terms, a 0BA thread having a 6 mm diameter and 1 mm pitch. Other threads in the BA series are related to 0BA in a geometric series with the common factors 0.9 and 1.2. For example, a 4BA thread has pitch [math]\displaystyle{ \scriptstyle p=0.9^4 }[/math] mm (0.65 mm) and diameter [math]\displaystyle{ \scriptstyle 6p^{1.2} }[/math] mm (3.62 mm). Although 0BA has the same diameter and pitch as ISO M6, the threads have different forms and are not compatible.

BA threads are still common in some niche applications. Certain types of fine machinery, such as moving-coil meters and clocks, tend to have BA threads wherever they are manufactured. BA sizes were also used extensively in aircraft, especially those manufactured in the United Kingdom. BA sizing is still used in railway signalling, mainly for the termination of electrical equipment and cabling.

BA threads are extensively used in Model Engineering where the smaller hex head sizes make scale fastenings easier to represent. As a result, many UK Model Engineering suppliers still carry stocks of BA fasteners up to typically 8BA and 10BA. 5BA is also commonly used as it can be threaded onto 1/8 rod.[52]

Unified Thread Standard

Main page: Engineering:Unified Thread Standard

The Unified Thread Standard (UTS) is most commonly used in the United States , but is also extensively used in Canada and occasionally in other countries. The size of a UTS screw is described using the following format: X-Y, where X is the nominal size (the hole or slot size in standard manufacturing practice through which the shank of the screw can easily be pushed) and Y is the threads per inch (TPI). For sizes ​14 inch and larger the size is given as a fraction; for sizes less than this an integer is used, ranging from 0 to 16. The integer sizes can be converted to the actual diameter by using the formula 0.060 + (0.013 × number). For example, a #4 screw is 0.060 + (0.013 × 4) = 0.060 + 0.052 = 0.112 inches in diameter. There are also screw sizes smaller than "0" (zero or ought). The sizes are 00, 000, 0000 which are usually referred to as two ought, three ought, and four ought. Most eyeglasses have the bows screwed to the frame with 00-72 (pronounced double ought – seventy two) size screws. To calculate the major diameter of "ought" size screws count the number of 0's and multiply this number by 0.013 and subtract from 0.060. For example, the major diameter of a 000-72 screw thread is .060 – (3 x .013) = 0.060 − 0.039 = .021 inches. For most size screws there are multiple TPI available, with the most common being designated a Unified Coarse Thread (UNC or UN) and Unified Fine Thread (UNF or UF). Note: In countries other than the United States and Canada, the ISO Metric Screw Thread System is primarily used today. Unlike most other countries the United States and Canada still use the Unified (Inch) Thread System. However, both are moving over to the ISO Metric System.[citation needed] It is estimated that approximately 60% of screw threads in use in the United States are still inch based.[53]

Mechanical classifications

The numbers stamped on the head of the bolt are referred to the grade of the bolt used in certain application with the strength of a bolt. High-strength steel bolts usually have a hexagonal head with an ISO strength rating (called property class) stamped on the head. And the absence of marking/number indicates a lower grade bolt with low strength. The property classes most often used are 5.8, 8.8, and 10.9. The number before the point is the ultimate tensile strength in MPa divided by 100. The number after the point is the multiplier ratio of yield strength to ultimate tensile strength. For example, a property class 5.8 bolt has a nominal (minimum) ultimate tensile strength of 500 MPa, and a tensile yield strength of 0.8 times ultimate tensile strength or 0.8 (500) = 400 MPa.

Ultimate tensile strength is the tensile stress at which the bolt fails. Tensile yield strength is the stress at which the bolt will yield in tension across the entire section of the bolt and receive a permanent set (an elongation from which it will not recover when the force is removed) of 0.2% offset strain. Proof strength is the usable strength of the fastener. Tension testing of a bolt up to the proof load should not cause permanent set of the bolt and should be conducted on actual fasteners rather than calculated.[54] If a bolt is tensioned beyond the proof load, it may behave in plastic manner due to yielding in the threads and the tension preload may be lost due to the permanent plastic deformations. When elongating a fastener prior to reaching the yield point, the fastener is said to be operating in the elastic region; whereas elongation beyond the yield point is referred to as operating in the plastic region of the bolt material. If a bolt is loaded in tension beyond its proof strength, the yielding at the net root section of the bolt will continue until the entire section begins to yield and it has exceeded its yield strength. If tension increases, the bolt fractures at its ultimate strength.

Mild steel bolts have property class 4.6, which is 400 MPa ultimate strength and 0.6*400=240 MPa yield strength. High-strength steel bolts have property class 8.8, which is 800 MPa ultimate strength and 0.8*800=640 MPa yield strength or above.

The same type of screw or bolt can be made in many different grades of material. For critical high-tensile-strength applications, low-grade bolts may fail, resulting in damage or injury. On SAE-standard bolts, a distinctive pattern of marking is impressed on the heads to allow inspection and validation of the strength of the bolt.[55] However, low-cost counterfeit fasteners may be found with actual strength far less than indicated by the markings. Such inferior fasteners are a danger to life and property when used in aircraft, automobiles, heavy trucks, and similar critical applications.[56]

Differentiation between bolt and screw

The Machinery's Handbook describes the distinction between bolts and screws as follows:

A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torquing a nut. A screw is an externally threaded fastener capable of being inserted into holes in assembled parts, of mating with a preformed internal thread or forming its own thread, and of being tightened or released by torquing the head. An externally threaded fastener which is prevented from being turned during assembly and which can be tightened or released only by torquing a nut is a bolt. (Example: round head bolts, track bolts, plow bolts.) An externally threaded fastener that has thread form which prohibits assembly with a nut having a straight thread of multiple pitch length is a screw. (Example: wood screws, tapping screws.)[57]

This distinction is consistent with ASME B18.2.1 and some dictionary definitions for screw[58][59] and bolt.[60][61][62]

Old USS and SAE standards defined cap screws as fasteners with shanks that were threaded to the head and bolts as fasteners with shanks that were partially unthreaded.[63] The federal government of the United States made an effort to formalize the difference between a bolt and a screw, because different tariffs apply to each.[64]

See also

References

  1. Oberg et al. 2000, p. 1492
  2. Smith 1990, p. 39.
  3. Blake, A. (1986). What Every Engineer Should Know about Threaded Fasteners: Materials and Design. Taylor & Francis. p. 9. ISBN 978-0-8493-8379-3. https://books.google.com/books?id=TAWznUs54uwC&pg=PA9. Retrieved 2021-01-24. 
  4. McManus, C. (2002). Right Hand, Left Hand: The Origins of Asymmetry in Brains, Bodies, Atoms and Cultures. Harvard University Press. p. 46. ISBN 978-0-674-01613-2. https://books.google.com/books?id=20oza63ZuG4C&pg=PA46. 
  5. Anderson, J.G. (1983). Technical Shop Mathematics. Industrial Press. p. 200. ISBN 978-0-8311-1145-8. https://books.google.com/books?id=BabtEFxgZ2AC&pg=PA200. 
  6. "Mechanics". Encyclopædia Britannica. 3. John Donaldson. 1773. pp. 44. https://books.google.com/books?id=Ow8UAAAAQAAJ&q=%22simple+machine%22+%22mechanical+powers%22+lever+screw+inclined+plane+wedge+wheel+pulley&pg=PA44. Retrieved 5 April 2020. 
  7. Morris, Christopher G. (1992). Academic Press Dictionary of Science and Technology. Gulf Professional Publishing. pp. 1993. ISBN 978-0122004001. https://books.google.com/books?id=nauWlPTBcjIC&q=%22simple+machine%22&pg=PA1993. 
  8. Woods, Michael; Mary B. Woods (2000). Ancient Machines: From Wedges to Waterwheels. USA: Twenty-First Century Books. pp. 58. ISBN 0-8225-2994-7. https://books.google.com/books?id=E1tzW_aDnxsC&pg=PA58. 
  9. Moorey, Peter Roger Stuart (1999). Ancient Mesopotamian Materials and Industries: The Archaeological Evidence. Eisenbrauns. p. 4. ISBN 9781575060422. https://archive.org/details/ancientmesopotam00moor. 
  10. Bunch, Bryan H.; Alexander Hellemans (2004). The history of science and technology. Houghton Mifflin Harcourt. pp. 69. ISBN 0-618-22123-9. https://archive.org/details/isbn_9780618221233. "screw." 
  11. Krebs, Robert E.; Carolyn A. Krebs (2003). Groundbreaking scientific experiments, inventions, and discoveries of the ancient world. USA: Greenwood Publishing Group. pp. 114. ISBN 0-313-31342-3. https://books.google.com/books?id=0H0fjBeseVEC&q=archimedean+simple+machine&pg=PA114. 
  12. Rybczynski 2000, pp. 90–94.
  13. Rybczynski 2000, pp. 34, 66, 90.
  14. "Am_Wood_Screws". http://cool.conservation-us.org/coolaic/sg/wag/Am_Wood_Screws.pdf. 
  15. Rybczynski 2000, pp. 75–99.
  16. Rybczynski 2000, p. 99.
  17. 17.0 17.1 17.2 Rybczynski 2000, p. 75.
  18. Rybczynski 2000, p. 76.
  19. Rybczynski 2000, pp. 76–78.
  20. J. Thomas Mitchell (3 February 2009). Centre County: From Its Earliest Settlement to the Year 1915. Penn State Press. pp. 39–. ISBN 978-0-271-04499-6. https://books.google.com/books?id=pEoAFOP4D-YC&pg=PA39. 
  21. 21.0 21.1 Rybczynski 2000, pp. 79–81.
  22. U.S. Patent 161,390.
  23. Hallowell 1951, pp. 51–59.
  24. See:
    • Henry F. Phillips and Thomas M. Fitzpatrick, "Screw," U.S. Patent no. 2,046,839 (filed: January 15, 1935; issued: July 7, 1936).
    • Henry F. Phillips and Thomas M. Fitzpatrick, "Screw driver," U.S. Patent no. 2,046,840 (filed: January 15, 1935; issued: July 7, 1936).
  25. Rybczynski 2000, p. 104.
  26. "Faster Superstore catalog of sheet-metal screws and self-tapping screws". https://www.fastenersuperstore.com/products/self-tapping-sheet-metal-screws?pid=5992&query=sheet%20metal%20screws. 
  27. 27.0 27.1 White, Christopher. "Observations on the Development of Wood Screws in North America". http://www.wag-aic.org/Am_Wood_Screws.pdf. 
  28. Moxon, Joseph (1703). Mechanic Exercises: Or the Doctrine of Handy-Works. Mendham, NJ. 
  29. "Making 18th c wood screws". http://americanlongrifles.org/forum/index.php?topic=18831.0. 
  30. "Iron Age, Volume 44". 1889. https://books.google.com/books?id=1UIxAQAAMAAJ&pg=RA1-PA12. 
  31. Oberg et al. 2000, pp. 1568–1598.
  32. "Text of the Fastener Quality Act". National Institute of Standards and Technology. http://ts.nist.gov/WeightsAndMeasures/fqaregs2.cfm. 
  33. B18.2.1 - 1996 Square and Hex Bolts and Screws, Inch Series - Print-Book
  34. "lug bolt". http://autorepair.about.com/library/glossary/bldef-900.htm. 
  35. "head bolt". http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?leftNavPage=glossary&startLetter=h&targetPage=glossarySelected. 
  36. Oberg et al. 2000, p. 1497.
  37. Mitchell, George (1995). Carpentry and Joinery (3rd ed.). Cengage Learning. p. 205. ISBN 978-1-84480-079-7. https://books.google.com/books?id=XVFyWYdRsZMC&pg=PA205. 
  38. "Metric Handbook". http://www.blm.gov/nhp/efoia/wo/handbook/h9102.html. 
  39. "Mechanical properties of bolts, screws, and studs according DIN-ISO 898, part 1". http://mdmetric.com/fastindx/t15u.pdf. 
  40. 40.0 40.1 40.2 "Bolt grade markings and strength chart". http://www.boltdepot.com/fastener-information/Materials-and-Grades/Bolt-Grade-Chart.aspx. 
  41. 41.0 41.1 "ASTM F568M - 07". 2007. http://www.astm.org/Standards/F568M.htm. 
  42. 42.0 42.1 42.2 42.3 "Metric structural fasteners". http://www.icaen.uiowa.edu/~sdesign1/Text/fasteners_si.html. 
  43. 43.0 43.1 "ASTM A325M - 09". http://www.astm.org/Standards/A325M.htm. 
  44. 44.0 44.1 "ASTM A490M - 09". 2009. http://www.astm.org/Standards/A490M.htm. 
  45. "Mechanical Methods of Joining". http://www.engr.siu.edu/staff2/deruntz/IT208/Chapter%2015%20Mechanical%20Methods%20of%20Joining.ppt. 
  46. 46.0 46.1 46.2 46.3 46.4 46.5 46.6 46.7 46.8 "Grade Markings: Carbon Steel Bolts". http://www.fastspecinc.com/technical/technical.html. 
  47. 47.0 47.1 47.2 47.3 47.4 47.5 "Hardware, bulk — Technical information". https://jdparts.deere.com/partsmkt/document/english/pmac/36689_fb_BulkHardwareTechInfo.htm. 
  48. 48.0 48.1 48.2 48.3 48.4 48.5 48.6 48.7 "ASTM, SAE and ISO grade markings and mechanical properties for steel fasteners". http://www.americanfastener.com/technical/grade_markings_steel.asp. 
  49. 49.0 49.1 49.2 "Fastener identification marking". http://files.buildsite.com/dbderived-f/industrialthreadedproducts/derived_files/derived331165.pdf. 
  50. 50.0 50.1 Other markings may be used to denote atmospheric corrosion resistant material
  51. 51.0 51.1 51.2 "FastenalTechnicalReferenceGuide". http://www.fastenal.com/content/documents/FastenalTechnicalReferenceGuide.pdf. 
  52. "Thread Systems". http://www.threadcheck.com/technical-documents/thread-systems.pdf. 
  53. Cite error: Invalid <ref> tag; no text was provided for refs named Rybczynski2000pp97-99
  54. Brenner, Harry S. (1977). Parmley, Robert O.. ed. Standard Handbook of Fastening and Joining (5 ed.). New York: McGraw-Hill. p. Chapter 1 page 10. ISBN 0-07-048511-9. https://archive.org/details/standardhandbook00parm. 
  55. "How to Recognize Metric and SAE Bolts ", Chilton DIY, Retrieved April 26, 2016.
  56. "SAE Standards for Mobility Knowledge and Solutions" (in en). https://www.sae.org/site/standards/. 
  57. Oberg et al. 2000, p. 1492.
  58. "screw". Cambridge University Press. http://dictionary.cambridge.org/define.asp?key=screw*1+0&dict=A. 
  59. "screw". http://www.allwords.com/query.php?SearchType=3&Keyword=screw&goquery=Find+it%21&Language=ENG. 
  60. "bolt". http://www.merriam-webster.com/dictionary/bolt. 
  61. "bolt". Oxford. http://www.askoxford.com/concise_oed/bolt_1?view=uk. 
  62. "bolt". Cambridge University Press. http://dictionary.cambridge.org/define.asp?key=8680&dict=CALD. 
  63. "How to use tools and make repairs". Dyke's Automobile and Gasoline Engine Encyclopedia. A.L. Dyke. 1919. p. 701. https://books.google.com/books?id=WqI7AAAAMAAJ&q=sae+uss+screw+standard&pg=RA1-PA702. Retrieved 2009-01-13. 
  64. "What Every Member of the Trade Community Should Know About: Distinguishing Bolts from Screws". Washington, D.C., USA: U.S. Customs and Border Protection Agency (CBP). July 2012. http://www.cbp.gov/document/publications/distinguishing-bolts-screws. 

Bibliography

External links