DComplexMatrix1D
cern.colt.matrix.tdcomplex

Class DComplexMatrix1D

  • All Implemented Interfaces:
    Serializable, Cloneable
    Direct Known Subclasses:
    DenseDComplexMatrix1D, SparseDComplexMatrix1D, WrapperDComplexMatrix1D


    public abstract class DComplexMatrix1Dextends AbstractMatrix1D
    Abstract base class for 1-d matrices (aka vectors) holding complex elements. A matrix has a number of cells (its size), which are assigned upon instance construction. Elements are accessed via zero based indexes. Legal indexes are of the form [0..size()-1]. Any attempt to access an element at a coordinate index<0 || index>=size() will throw an IndexOutOfBoundsException.
    See Also:
    Serialized Form
    • Method Detail

      • aggregate

        public double[] aggregate(DComplexDComplexDComplexFunction aggr,                 DComplexDComplexFunction f)
        Applies a function to each cell and aggregates the results.
        Parameters:
        aggr - an aggregation function taking as first argument the current aggregation and as second argument the transformed current cell value.
        f - a function transforming the current cell value.
        Returns:
        the aggregated measure.
        See Also:
        DComplexFunctions
      • assign

        public DComplexMatrix1D assign(DComplexProcedure cond,                      double[] value)
        Assigns a value to all cells that satisfy a condition.
        Parameters:
        cond - a condition.
        value - a value (re=value[0], im=value[1]).
        Returns:
        this (for convenience only).
      • assign

        public DComplexMatrix1D assign(DComplexRealFunction f)
        Assigns the result of a function to the real part of the receiver. The imaginary part of the receiver is reset to zero.
        Parameters:
        f - a function object taking as argument the current cell's value.
        Returns:
        this (for convenience only).
        See Also:
        DComplexFunctions
      • assign

        public DComplexMatrix1D assign(DComplexMatrix1D other)
        Replaces all cell values of the receiver with the values of another matrix. Both matrices must have the same size. If both matrices share the same cells (as is the case if they are views derived from the same matrix) and intersect in an ambiguous way, then replaces as if using an intermediate auxiliary deep copy of other.
        Parameters:
        other - the source matrix to copy from (may be identical to the receiver).
        Returns:
        this (for convenience only).
        Throws:
        IllegalArgumentException - if size() != other.size().
      • assign

        public DComplexMatrix1D assign(double re,                      double im)
        Sets all cells to the state specified by re and im.
        Parameters:
        re - the real part of the value to be filled into the cells.
        im - the imaginary part of the value to be filled into the cells.
        Returns:
        this (for convenience only).
      • assign

        public DComplexMatrix1D assign(double[] values)
        Sets all cells to the state specified by values. values is required to have the same number of cells as the receiver. Complex data is represented by 2 double values in sequence: the real and imaginary parts, i.e. input array must be of size 2*size().

        The values are copied. So subsequent changes in values are not reflected in the matrix, and vice-versa.

        Parameters:
        values - the values to be filled into the cells.
        Returns:
        this (for convenience only).
        Throws:
        IllegalArgumentException - if values.length != 2*size().
      • assignImaginary

        public DComplexMatrix1D assignImaginary(DoubleMatrix1D other)
        Replaces imaginary part of the receiver with the values of another real matrix. The real part remains unchanged. Both matrices must have the same size.
        Parameters:
        other - the source matrix to copy from
        Returns:
        this (for convenience only).
        Throws:
        IllegalArgumentException - if size() != other.size().
      • assignReal

        public DComplexMatrix1D assignReal(DoubleMatrix1D other)
        Replaces real part of the receiver with the values of another real matrix. The imaginary part remains unchanged. Both matrices must have the same size.
        Parameters:
        other - the source matrix to copy from
        Returns:
        this (for convenience only).
        Throws:
        IllegalArgumentException - if size() != other.size().
      • cardinality

        public int cardinality()
        Returns the number of cells having non-zero values; ignores tolerance.
        Returns:
        the number of cells having non-zero values.
      • copy

        public DComplexMatrix1D copy()
        Constructs and returns a deep copy of the receiver.

        Note that the returned matrix is an independent deep copy. The returned matrix is not backed by this matrix, so changes in the returned matrix are not reflected in this matrix, and vice-versa.

        Returns:
        a deep copy of the receiver.
      • equals

        public boolean equals(double[] value)
        Returns whether all cells are equal to the given value.
        Parameters:
        value - the value to test against (re=value[0], im=value[1]).
        Returns:
        true if all cells are equal to the given value, false otherwise.
      • equals

        public boolean equals(Object obj)
        Compares this object against the specified object. The result is true if and only if the argument is not null and is at least a ComplexMatrix1D object that has the same sizes as the receiver and has exactly the same values at the same indexes.
        Overrides:
        equals in class Object
        Parameters:
        obj - the object to compare with.
        Returns:
        true if the objects are the same; false otherwise.
      • get

        public double[] get(int index)
        Returns the matrix cell value at coordinate index.
        Parameters:
        index - the index of the cell.
        Returns:
        the value of the specified cell.
        Throws:
        IndexOutOfBoundsException - if index<0 || index>=size().
      • elements

        public abstract Object elements()
        Returns the elements of this matrix.
        Returns:
        the elements
      • getImaginaryPart

        public abstract DoubleMatrix1D getImaginaryPart()
        Returns the imaginary part of this matrix
        Returns:
        the imaginary part
      • getNonZeros

        public void getNonZeros(IntArrayList indexList,               ArrayList<double[]> valueList)
        Fills the coordinates and values of cells having non-zero values into the specified lists. Fills into the lists, starting at index 0. After this call returns the specified lists all have a new size, the number of non-zero values.

        In general, fill order is unspecified. This implementation fills like: for (index = 0..size()-1) do ... . However, subclasses are free to us any other order, even an order that may change over time as cell values are changed. (Of course, result lists indexes are guaranteed to correspond to the same cell).

        Parameters:
        indexList - the list to be filled with indexes, can have any size.
        valueList - the list to be filled with values, can have any size.
      • getQuick

        public abstract double[] getQuick(int index)
        Returns the matrix cell value at coordinate index.

        Provided with invalid parameters this method may return invalid objects without throwing any exception. You should only use this method when you are absolutely sure that the coordinate is within bounds. Precondition (unchecked): index<0 || index>=size().

        Parameters:
        index - the index of the cell.
        Returns:
        the value of the specified cell.
      • getRealPart

        public abstract DoubleMatrix1D getRealPart()
        Returns the real part of this matrix
        Returns:
        the real part
      • like

        public DComplexMatrix1D like()
        Construct and returns a new empty matrix of the same dynamic type as the receiver, having the same size. For example, if the receiver is an instance of type DenseComplexMatrix1D the new matrix must also be of type DenseComplexMatrix1D. In general, the new matrix should have internal parametrization as similar as possible.
        Returns:
        a new empty matrix of the same dynamic type.
      • like

        public abstract DComplexMatrix1D like(int size)
        Construct and returns a new empty matrix of the same dynamic type as the receiver, having the specified size. For example, if the receiver is an instance of type DenseDComplexMatrix1D the new matrix must also be of type DenseDComplexMatrix1D. In general, the new matrix should have internal parametrization as similar as possible.
        Parameters:
        size - the number of cell the matrix shall have.
        Returns:
        a new empty matrix of the same dynamic type.
      • like2D

        public abstract DComplexMatrix2D like2D(int rows,                      int columns)
        Construct and returns a new 2-d matrix of the corresponding dynamic type, entirely independent of the receiver. For example, if the receiver is an instance of type DenseDComplexMatrix1D the new matrix must be of type DenseDComplexMatrix2D.
        Parameters:
        rows - the number of rows the matrix shall have.
        columns - the number of columns the matrix shall have.
        Returns:
        a new matrix of the corresponding dynamic type.
      • reshape

        public abstract DComplexMatrix2D reshape(int rows,                       int columns)
        Returns new DoubleMatrix2D of size rows x columns whose elements are taken column-wise from this matrix.
        Parameters:
        rows - number of rows
        columns - number of columns
        Returns:
        new 2D matrix with columns being the elements of this matrix.
      • reshape

        public abstract DComplexMatrix3D reshape(int slices,                       int rows,                       int columns)
        Returns new DoubleMatrix3D of size slices x rows x columns, whose elements are taken column-wise from this matrix.
        Parameters:
        rows - number of rows
        columns - number of columns
        Returns:
        new 2D matrix with columns being the elements of this matrix.
      • set

        public void set(int index,       double re,       double im)
        Sets the matrix cell at coordinate index to the specified value.
        Parameters:
        index - the index of the cell.
        re - the real part of the value to be filled into the specified cell.
        im - the imaginary part of the value to be filled into the specified cell.
        Throws:
        IndexOutOfBoundsException - if index<0 || index>=size().
      • set

        public void set(int index,       double[] value)
        Sets the matrix cell at coordinate index to the specified value.
        Parameters:
        index - the index of the cell.
        value - the value to be filled into the specified cell (re=value[0], im=value[1]).
        Throws:
        IndexOutOfBoundsException - if index<0 || index>=size().
      • setQuick

        public abstract void setQuick(int index,            double re,            double im)
        Sets the matrix cell at coordinate index to the specified value.

        Provided with invalid parameters this method may access illegal indexes without throwing any exception. You should only use this method when you are absolutely sure that the coordinate is within bounds. Precondition (unchecked): index<0 || index>=size().

        Parameters:
        index - the index of the cell.
        re - the real part of the value to be filled into the specified cell.
        im - the imaginary part of the value to be filled into the specified cell.
      • setQuick

        public abstract void setQuick(int index,            double[] value)
        Sets the matrix cell at coordinate index to the specified value.

        Provided with invalid parameters this method may access illegal indexes without throwing any exception. You should only use this method when you are absolutely sure that the coordinate is within bounds. Precondition (unchecked): index<0 || index>=size().

        Parameters:
        index - the index of the cell.
        value - the value to be filled into the specified cell (re=value[0], im=value[1]).
      • toArray

        public double[] toArray()
        Constructs and returns a 1-dimensional array containing the cell values. The values are copied. So subsequent changes in values are not reflected in the matrix, and vice-versa. The returned array values has the form
        for (int i = 0; i < size; i++) { tmp = getQuick(i); values[2 * i] = tmp[0]; //real part values[2 * i + 1] = tmp[1]; //imaginary part }
        Returns:
        an array filled with the values of the cells.
      • toArray

        public void toArray(double[] values)
        Fills the cell values into the specified 1-dimensional array. The values are copied. So subsequent changes in values are not reflected in the matrix, and vice-versa. After this call returns the array values has the form
        for (int i = 0; i < size; i++) { tmp = getQuick(i); values[2 * i] = tmp[0]; //real part values[2 * i + 1] = tmp[1]; //imaginary part }
        Throws:
        IllegalArgumentException - if values.length < 2*size().
      • toString

        public String toString()
        Returns a string representation using default formatting ("%.4f").
        Overrides:
        toString in class Object
        Returns:
        a string representation of the matrix.
      • toString

        public String toString(String format)
        Returns a string representation using given format
        Parameters:
        format - a format for java.lang.String.format().
        Returns:
        a string representation of the matrix.
      • viewFlip

        public DComplexMatrix1D viewFlip()
        Constructs and returns a new flip view. What used to be index 0 is now index size()-1, ..., what used to be index size()-1 is now index 0. The returned view is backed by this matrix, so changes in the returned view are reflected in this matrix, and vice-versa.
        Returns:
        a new flip view.
      • viewPart

        public DComplexMatrix1D viewPart(int index,                        int width)
        Constructs and returns a new sub-range view that is a width sub matrix starting at index. Operations on the returned view can only be applied to the restricted range. Any attempt to access coordinates not contained in the view will throw an IndexOutOfBoundsException.

        Note that the view is really just a range restriction: The returned matrix is backed by this matrix, so changes in the returned matrix are reflected in this matrix, and vice-versa.

        The view contains the cells from index..index+width-1. and has view.size() == width. A view's legal coordinates are again zero based, as usual. In other words, legal coordinates of the view are 0 .. view.size()-1==width-1. As usual, any attempt to access a cell at other coordinates will throw an IndexOutOfBoundsException.

        Parameters:
        index - The index of the first cell.
        width - The width of the range.
        Returns:
        the new view.
        Throws:
        IndexOutOfBoundsException - if index<0 || width<0 || index+width>size().
      • viewSelection

        public DComplexMatrix1D viewSelection(DComplexProcedure condition)
        Constructs and returns a new selection view that is a matrix holding the cells matching the given condition. Applies the condition to each cell and takes only those cells where condition.apply(get(i)) yields true. The returned view is backed by this matrix, so changes in the returned view are reflected in this matrix, and vice-versa.
        Parameters:
        condition - The condition to be matched.
        Returns:
        the new view.
      • viewSelection

        public DComplexMatrix1D viewSelection(int[] indexes)
        Constructs and returns a new selection view that is a matrix holding the indicated cells. There holds view.size() == indexes.length and view.get(i) == this.get(indexes[i]). Indexes can occur multiple times and can be in arbitrary order. Note that modifying indexes after this call has returned has no effect on the view. The returned view is backed by this matrix, so changes in the returned view are reflected in this matrix, and vice-versa.
        Parameters:
        indexes - The indexes of the cells that shall be visible in the new view. To indicate that all cells shall be visible, simply set this parameter to null.
        Returns:
        the new view.
        Throws:
        IndexOutOfBoundsException - if !(0 <= indexes[i] < size()) for any i=0..indexes.length()-1.
      • viewStrides

        public DComplexMatrix1D viewStrides(int stride)
        Constructs and returns a new stride view which is a sub matrix consisting of every i-th cell. More specifically, the view has size this.size()/stride holding cells this.get(i*stride) for all i = 0..size()/stride - 1.
        Parameters:
        stride - the step factor.
        Returns:
        the new view.
        Throws:
        IndexOutOfBoundsException - if stride <= 0.
      • zDotProduct

        public double[] zDotProduct(DComplexMatrix1D y)
        Returns the dot product of two vectors x and y. Operates on cells at indexes 0 .. Math.min(size(),y.size()).
        Parameters:
        y - the second vector.
        Returns:
        the sum of products.
      • zDotProduct

        public double[] zDotProduct(DComplexMatrix1D y,                   int from,                   int length)
        Returns the dot product of two vectors x and y. Operates on cells at indexes from .. Min(size(),y.size(),from+length)-1.
        Parameters:
        y - the second vector.
        from - the first index to be considered.
        length - the number of cells to be considered.
        Returns:
        the sum of products; zero if from<0 || length<0.
      • zDotProduct

        public double[] zDotProduct(DComplexMatrix1D y,                   int from,                   int length,                   IntArrayList nonZeroIndexes)
        Returns the dot product of two vectors x and y.
        Parameters:
        y - the second vector.
        nonZeroIndexes - the indexes of cells in yhaving a non-zero value.
        Returns:
        the sum of products.
      • zSum

        public double[] zSum()
        Returns the sum of all cells.
        Returns:
        the sum.

SCaVis 2.1 © jWork.ORG